5 Tips for Proper Air Conditioner Installation
Switching to a modern high-efficiency air conditioner is one of the best ways to reduce energy bills. However, even the most energy-efficient unit won’t perform as expected if it’s not installed correctly.
If you’re planning an air conditioner installation project in St Louis, these tips will help you avoid mistakes:
1. Ensure enough indoor space for installation, repair, and maintenance
Your contractor should allow adequate indoor space not only for the installation but also for the maintenance and repair of your new unit. The contractor should also install an access door that will allow for easy cleaning of the evaporator coil.
2. Make sure there are sufficient registers
Your air conditioner needs enough supply and return air registers. Sufficient supply registers will optimally deliver air-conditioned air to the building. Enough return air registers will also carry warm air back to the unit efficiently.
3. Install duct work in the right place and seal them properly
If possible, the ductwork should be within the air-conditioned space. Ask your contractor about having ductwork in the conditioned rooms rather than in the attic. Your technician should also seal all the ducts. In addition, verify that the professional sizes the ducts with an appropriate sizing methodology.
4. Locate the condensing unit and the thermostat correctly
The condensing unit should be located where its noise won’t bother you or your neighbors at night. The unit should also be away from objects that may block airflow to it. Regarding the thermostat, make sure it’s not near windows, supply registers, or any other heat sources.
5. Ensure correct refrigerant charge
The refrigerant charge should match the manufacturer’s specification. For optimum performance and efficiency, verify that your new unit has not been undercharged or overcharged.
Sizing and installation determine the efficiency of an air conditioner. Ensure proper sizing of your new unit to boost your comfort while reducing your bills. Proper unit location, adequate insulation, and correct duct insulation will further improve efficiency.